For parents, the safety of pacifiers used by babies is always the top priority – the material must be non-toxic, and the pacifier must be durable and resistant to damage. The IOTA LSR 2618G series liquid silicone rubber for new national standard pacifiers not only fully complies with the GB38995-2020 Standard for Baby Products but also has the advantages of high transparency and strong performance, making it an excellent choice for baby product production.

In terms of appearance, it is a pure transparent material. Pacifiers made from it allow parents to clearly see the internal state, so there is no need to worry about dirt accumulating inside and being difficult to detect, making daily cleaning more reassuring. Moreover, it offers three models with different hardness levels to choose from: 
- 2618G has a hardness of Shore A 18, which is soft in texture and suitable for young babies who are new to using pacifiers; 
- 2620G has a hardness of Shore A 22, with moderate flexibility, which can meet the sucking needs of most babies; 
- 2625G has a hardness of Shore A 25, with slight support, suitable for babies who like to suck hard. It can accurately match different needs.

More importantly, it excels in safety and durability. As a material specially designed for baby products, it has passed strict new national standard testing, contains no harmful substances, and is safe for babies to suck for a long time. In terms of physical properties, it performs exceptionally well: 
- All three models have a density of 1.10g/cm³, with uniform texture, so the pacifiers made will not have local areas that are too thick or too thin; 
- The tensile strength is up to 7.5MPa, meaning the pacifier can withstand the baby's pulling force without breaking easily, avoiding the risk of small parts falling off; 
- The elongation rate is at least 800%, so even if it is bitten and stretched by the baby, it can return to its original shape and is not easy to deform; 
- The tear strength is ≥20KN/m, so it will not crack easily when bitten by the baby, greatly extending its service life.

During production, it is only necessary to mix Component A and Component B in a ratio of 1:1, and then heat them at 130°C and 15MPa for 5 minutes to cure and form, making the operation convenient and efficient. However, it should be noted that it is a platinum-catalyzed product – Component A contains a platinum catalyst, so catalyst poisoning should be avoided during use; only Component A and Component B of the same batch number can be mixed to ensure stable performance; the material should also be thoroughly stirred before use to prevent sedimentation during storage from affecting fluidity.

This liquid silicone rubber, which balances safety, performance, and practicality, undoubtedly provides a reliable guarantee for the production of baby pacifiers and other baby products, making parents more at ease when choosing baby products.