It is inevitable to encounter small accidents while driving—scraping against the curb when parking, or being scratched by tree branches when passing through flower bushes, all of which may leave scratches on the car paint. However, the IOTA 9970 Organopolysilazane Car Coating, with its 5H high hardness and strong adhesion, can build a "scratch-proof barrier" for the car paint, allowing car owners to say goodbye to "anxiety about small scratches".
Its core advantage lies in the silicon dioxide protective film formed after crystallization. The hardness of this film reaches 5H (Chinese pencil hardness standard), so minor frictions commonly encountered in daily life can hardly damage it. For example, if you accidentally touch the car door with a key when getting on or off the car, or if the car is slightly scratched by shrubs in a narrow road, the coating can directly "withstand" the impact, preventing the scratches from damaging the original factory paint, which greatly reduces the trouble and cost of repainting later. Moreover, the adhesion of this film reaches level 0 (cross-cut test), which is like growing on the car paint. Whether it is washed with a high-pressure water gun during car washing or exposed to wind and rain for a long time, it will not fall off or peel, and can protect the car paint for a long time.
In addition to scratch resistance, its "additional functions" are also very practical. Its transparency exceeds 90%, so applying it on the paint surface will not affect the original color of the car at all; instead, it can enhance the gloss of the paint. Especially for black cars, after application, the gloss is more full and looks more high-end. It has excellent UV resistance, which can prevent the car paint from fading and yellowing due to sun exposure. For example, even if you park the car in an open-air parking lot in summer, you don't have to worry about the paint losing its luster after a long time. It has extremely strong hydrophobicity with a water contact angle of 110°. When it rains, water droplets will roll off along the coating without leaving water marks on the paint surface. It can also reduce the adhesion of stains such as dust and bird droppings, making daily maintenance more worry-free.
The application process is also relatively easy to operate, even for beginners. There is no need to polish a new car; for areas with scratches, first sand them smooth, then thoroughly clean the car body and perform degreasing treatment to ensure the paint surface is dry and free of oil stains. Next, pour the coating liquid onto a glasses cloth or a special sponge, and apply it in a cross pattern of "horizontal wiping + vertical wiping". It is recommended to apply it in sections—for example, start with the hood. After application, use a dry towel to smooth it out starting from the application point after 1 minute, then process the doors, roof, and rear of the car in sequence. After all parts are coated, place the car in a clean and ventilated place and let it stand for 2 hours to complete the entire application.
During application, it should be noted that a dry day should be chosen to avoid application on rainy days. Do not let the car get wet within 24 hours after coating; if you have to drive out in the rain, wipe off the moisture on the paint surface in a timely manner after returning. Since the product has a slight odor during application, remember to wear disposable gloves and do not breathe directly towards the bottle mouth.
This car coating, which focuses on "scratch prevention" and balances appearance and durability, undoubtedly provides car owners with a more worry-free car paint maintenance solution, allowing the beloved car to maintain a perfect state for a long time.
