[Industry News]
In the maternal and infant care sector, a breakthrough material is attracting industry attention—the IOTA LSR 3230 series liquid silicone rubber. With its "rapid molding, safety assured" features, it provides an innovative solution for baby product manufacturing.

[Key Highlights]
The material adopts a two-component 1:1 mixing design, eliminating the need for traditional secondary vulcanization and significantly shortening the production cycle. For example, with high-temperature curing at 130°C, molding is completed in just 90 seconds—improving efficiency by over 80% compared to conventional processes. Test data show a tensile strength of 7.5 MPa (equivalent to twice the pulling force of an adult's hand) and an elongation rate as high as 650%, enabling it to withstand repeated deformation without breaking.

[Safety Certifications]
The product has obtained multiple international certifications, including BfR, FDA, and ROHS, with heavy metal migration controlled below ppb levels. Experiments indicate that at a thickness of 2 mm, high-temperature curing at 150°C requires only 45 seconds, and the post-curing density remains stable at 1.11 g/cm³, ensuring no risk of deformation during long-term use. Tests by a well-known maternal and infant brand show that pacifiers made from this material have an extended temperature resistance range of -40°C to 230°C and maintain structural integrity even after 100,000 folding tests.

[Application Scenarios]
Currently, the material has been successfully applied in baby pacifiers, bottle sealing rings, and food-grade containers. Its unique mold release properties increase the surface smoothness of products by 40% after demolding, effectively reducing subsequent processing steps. Additionally, in a 72-hour continuous simulation test conducted by a dairy company, no detectable leaching was observed, meeting the stringent standards for infant contact materials.

[Operational Tips]
Technicians specifically emphasize that due to the inclusion of platinum catalysts, strict measures must be taken to avoid light and moisture during operation. Specialized mixing equipment is recommended to ensure uniform composition. The first batch of mass-produced products has passed third-party aging tests and is expected to be fully launched into the market this quarter.