For large-scale production of baby products, kitchen accessories and other items, materials must not only have excellent performance but also ensure processing efficiency. Materials with slow curing, low strength and complex proportioning often slow down the production line. A high-strength fumed liquid silicone rubber of baby care grade, with instant curing in 6-10 seconds, simple 1:1 proportioning, and excellent mechanical properties, has become an "efficiency accelerator" on the production line, enabling products to be produced faster and more durably, and greatly improving production efficiency and yield rate. Its processing efficiency is outstanding in the industry. For products with a thickness of 2mm, it can be fully cured in only 6-10 seconds at a high temperature of 200℃. Compared with the curing time of traditional silicone which often takes several minutes, the production cycle is greatly shortened, and the single-mold production efficiency is directly doubled, perfectly adapting to large-scale injection molding production lines. At the same time, it adopts A/B two-component mixing with a 1:1 weight ratio, no complex calculation or conversion is needed. Workers on the production line can quickly get started without professional training, completely avoiding material waste and defective products caused by proportioning errors, and the efficiency of the proportioning link is doubled. Its mechanical properties are even more impressive: the maximum tensile strength can reach 10.0MPa, the peak tear strength is 35KN/m, and the maximum elongation is 900%. The molded products are not easy to break when stretched or torn, even for teething toys that babies bite hard and silicone kitchenware used frequently, they can maintain stable performance for a long time with full durability. In addition, the linear shrinkage rate is only 2.0-2.1%, and the cured products have a regular shape without deformation or edge warping, no additional polishing or trimming is needed, further saving production processes. From the mass production of baby products, to the mold forming of kitchen accessories, and the processing of gaskets, this silicone easily integrates into various production lines with the advantages of fast curing, easy operation and high strength, saving enterprises a lot of time and labor costs, and achieving dual improvement of production efficiency and product quality.