When looking for coatings, people often hope they can not only resist high temperatures but also balance environmental friendliness and practicality. The IOTA ST4 high-temperature resistant water-based nano-ceramic coating not only endures temperatures up to 900°C but also acts as a fire-retardant coating to safeguard safety. It also boasts multiple advantages such as graffiti resistance and stain resistance, making it an excellent choice for various scenarios.
Its most striking feature is being "environmentally friendly and non-toxic". As a water-based coating, it uses pure water as a solvent, free of harmful solvents like alcohols and esters. No toxic gases such as formaldehyde or benzene are released during construction and use, posing no threat to the health of construction workers and users. Even when used for coating indoor furniture, it is completely reliable.
In terms of performance, it is an "all-rounder". With a hardness of up to 9H (per Chinese pencil hardness standard), it barely leaves marks from daily scratches. For instance, if metal surfaces are coated with it, they won’t be easily damaged even when slightly scratched by keys or tools. It also has excellent acid and alkali resistance—even when in contact with kitchen vinegar or bathroom cleaning agents, the coating won’t be corroded or discolored. After curing, it is also graffiti-resistant, oil-resistant, and stain-resistant. If walls or furniture are coated with it, even if oil stains or handwriting accidentally get on them, they can be cleaned with a simple wipe, greatly reducing cleaning troubles.
Its "trump card" lies in its high-temperature and fire resistance. Capable of withstanding 900°C, when applied to wood surfaces, it forms a fire-retardant coating that blocks the spread of flames in case of high temperatures, adding an extra layer of safety protection. Moreover, its adhesion reaches Grade 0 (per cross-cut test standard). When coated on substrates like metal, glass, ceramics, and wood, it adheres firmly without peeling or falling off, ensuring maximum durability.
Construction is also very convenient. First, polish the substrate clean and remove oil, then apply the coating via brushing, pouring, spin-coating, or rolling. Curing methods are flexible: under natural conditions, the surface dries in 30 minutes and fully cures in 7 days. If you want to speed up progress, heating at 150°C for 10 minutes enables initial curing, with hardness reaching 5-8H; after 3 hours of heating for full curing, the hardness can reach 9H, meeting the needs of different construction schedules.
Whether for metal component anti-corrosion, glass surface protection, wood furniture coating, or indoor and outdoor wall decoration, this coating—integrating high-temperature resistance, fire resistance, environmental friendliness, and durability—can handle it all, providing dual guarantees of safety and practicality for different scenarios.
