When choosing a pacifier for their babies, parents often struggle with the dilemma: "too soft and afraid it will be bitten apart, too hard and afraid it will hurt the baby's mouth". However, the IOTA LSR 2618G series liquid silicone rubber for pacifiers can achieve "both softness and durability" – it not only allows babies to suck comfortably but also can withstand long-term use, perfectly resolving parents' concerns.

Its core advantage lies in "precise softness control". It launches three hardness models: 2618G, 2620G, and 2625G, covering the needs of different babies. Among them:
- 2618G is the softest, with a texture as delicate as a cloud. When young babies suck, they can feel a natural touch, reducing irritation to the mouth;
- 2620G has moderate flexibility. It has enough softness to make it easy for babies to suck, while also maintaining a stable pacifier shape and not collapsing easily;
- 2625G is slightly firmer, suitable for babies who have grown deciduous teeth and like to bite. It can withstand a certain amount of biting force and is not easy to be bitten apart.

Although it is soft in texture, its durability is by no means compromised. Its tensile strength is up to 7.5MPa, which is equivalent to being able to pull the pacifier hard without breaking it easily, avoiding the situation where the pacifier is damaged when the baby pulls it. The elongation rate is as high as 800%-900%, so even if it is bitten and deformed by the baby, it can rebound quickly after being released and will not remain in a stretched state, greatly extending the service life. The tear strength is ≥20KN/m, so it will not crack easily when bitten or pulled by the baby, eliminating the need for parents to replace the pacifier frequently and saving them more trouble.

In terms of safety, it is even more reassuring. It fully complies with the GB38995-2020 Standard for Baby Bottles and Pacifiers, with pure and non-toxic material, so it is safe for babies to be in long-term contact with it. Moreover, it is a highly transparent material, and the pacifiers made from it are crystal clear. Whether there is residual milk stain inside can be seen at a glance, which is convenient for parents to clean thoroughly and reduce the risk of bacterial growth.

In production and application, its operation is also very convenient. Component A and Component B can be used after being mixed in a ratio of 1:1. After mixing, it has good fluidity and can be evenly filled into the mold, resulting in pacifiers with smooth surfaces and no defects. The curing conditions are also simple – it can be formed by heating at 130°C for 5 minutes under a pressure of 15MPa, which is suitable for large-scale production. However, it should be noted that it needs to be stored in an environment below 23°C, and unopened products can be stored for 12 months. If the shelf life is exceeded, the product can only be used after passing the inspection.

This liquid silicone rubber, which balances comfort and durability, allows babies to use more comfortable pacifiers and gives parents more peace of mind. It has become a high-quality material choice in the baby product field.